See us at Interphex Puerto Rico Booth #431!

Need more information?  Call us at 800.528.7411 or email sales@azic.com.

End of Life Notification

Please note that as of October 30, 2011, Arizona Instrument can no longer guarantee production on the following lines of moisture analyzers.  Some of the components within these units are no longer available, are out of production, or can no longer be manufactured to our specifications. 

Though we cannot guarantee new production of the following instruments, but will continue to service our existing customers for many years to come.

• Computrac^â MAX® 1000
• Computrac® MAX® 2000
• Computrac® MAX® 2000XL
• Computrac® MAX® 2000XL 4.36 Advantage

*MAX® Series was first introduced in June 1994

In place of these instrument models, we offer the Computrac® MAX® 4000XL High Performance Moisture Analyzer.  We also offer the MAX® 4000 for customers using the MAX® 1000.  Please see the Computrac® MAX® 4000XL Highlights or call our sales department at 800.528.7411 or email sales@azic.com.

If you have any questions regarding the production of Computrac® moisture analyzers, please call Customer Service at 800.235.3360 or 602.470.1414, or email us at support@azic.com.

As always, we appreciate your continued support.

Sincerely,
Rick Ervin, Vice President - Sales

Three Promotions within Arizona Instrument LLC

ARIZONA INSTRUMENT LLC
Exclusive Manufacturer of Computrac® Moisture Analyzers and Jerome® Toxic Gas Analyzers
3375 N. Delaware St.
Chandler, AZ 85225
marketing@azic.com | www.azic.com

FOR IMMEDIATE RELEASE

THREE PROMOTIONS WITHIN ARIZONA INSTRUMENT LLC
Congratulations to Linda Shepherd, Ben Brown, and Rick Ervin

Chandler, Ariz (September 26, 2011) – [ARIZONA INSTRUMENT LLC], the makers of Computrac Moisture Analyzers and Jerome Toxic Gas Analyzers, announces the following promotions, effective immediately, including: 

Linda Shepherd from Controller to Vice President – Finance
Ben Brown from Operations Manager to Vice President – Operations
Rick Ervin from Director of Sales to Vice President – Sales

“Each of these individuals has been a key part of our success at AZI, and we are thrilled to promote them to these important positions,” said George Hays, President of ARIZONA INSTRUMENT LLC.   Linda Shepherd joined the company in 1984, Ben Brown in 1996, and Rick Ervin in 1993.  In that time, each quickly rose to supervisory and management positions.  “We plan to continue growing this company,” said Mr. Hays.  

For additional information:

Shari Moore, Marketing Manager

800.528.7411 | marketing@azic.com

GREEN alternative to Karl Fischer titration

The Computrac Vapor Pro series of Moisture Analyzers uses a relative humidity sensor-based technology and correlates to the Karl Fischer coulometric titration method (with an oven attachment) in precision and accuracy.  The analyzers do not utilize reagents, minimizing consumables, and is simple to operate.

Computrac Vapor Pro series heats a sample of test material in a septum bottle.  Evolved volatiles are passed to an analysis cell where the moisture content of flowing gas is measured.  A microprocessor integrates the vaying moisture signal and convers the signal to micrograms of water for display.  Results are available in parts per million, percent moisture, or total micrograms of water.

Arizona Instrument's prediction algorithm automatically terminates the test in just minutes when sufficient information is collected to allow accurate determination of the sample's moisture content.  The heating range of the Vapor Pro series is 25°C to 275°C.  Test parameters such as sample size, heater temperature and test ending criteria can be altered to optimize speed and accuracy.

Computrac Vapor Pro Moisture Specific Analyzer
Computrac Vapor Pro Rx Moisture Specific Analyzer (Pharmaceuticals)
Computrac Vapor Pro Fx Moisture Specific Analyzer (Oils)

800.528.7411 | sales@azic.com | www.azic.com | Made in USA

What is Rapid Loss on Drying Technology?

Computrac Moisture Determination provides a method of moisture analysis by utilizing the Loss on Drying (LOD) Method.  Simply press start, and the instrument will tell you what to do!

After taring the pan, a sample is placed on the pan.  The four place analytical balance weighs the initial sample, the ceramic or nickel chromium heating element heats up the sample evenly (no hot or cold spots) to the desired temperature.  Our full service lab develops each customer's parameter set ahead of time (FREE) so the instrument will already know what you want to do - whether that be faster test times or more accurate results, or both.

Loss on Drying is a loss of weight on the sample.  Arizona Instrument is unmatched in terms of accuracy and repeatability, durability and speed.  Our instrumentation is precise enough for a lab environment, with product quality durability.

The heating elements are designed for even heating, to ensure rapid results with high accuracy and repeatability.

Check out our newest additions to the Computrac MAX line of moisture analyzers.
Contact our sales department for specific questions at 800.528.7411 | sales@azic.com.

Computrac MAX 5000XL Moisture | Solids | Ash Analyzer
Computrac MAX 4000XL Moisture | Solids Analyzer

  

Free Water Bottle at Plastec East!

Stop by Booth #415 at Plastec East, and hit up Boss Man Ben for a free Computrac Water Bottle!

We will be featuring the Green Alternative to Karl Fischer - the Vapor Pro, and the latest and greatest addition to loss on drying technology, the Computrac MAX 4000XL Moisture | Solids Analyzer. 

The MAX 4000XL has a cool down fan for greater throughput, a nitrogen purge option, and color LCD display, among its many features.

Find out more at http://www.azic.com/downloads/brochures/Computrac®%20MAX®%204000XL%20Brochure.pdf!

Training at AZI!

Arizona Instrument has 4 visitors in training classes at our Chandler, Arizona facility location.  Visit us at http://www.azic.com/cs_training.aspx to find out how to set up a training for your company!